How To Build A Raised Brick Pond – One of the main benefits of the instant pool now manufactured by Atlantica Gardens Ltd is that you won’t have to leave your pool if you decide to move. You can also move or expand your pond and your koi will be back in their home in no time!
The pools are an extension of our tall window frames. The pools have the same lifetime warranty as the frames and are laser cut from 3mm thick 316 stainless steel. They are manufactured to the same high standards that people expect from our products.
How To Build A Raised Brick Pond
A traditional 6m x 3m pool raised from blocks or bricks costs around £30-35,000. An Instantpond this size costs £15,000 (brick finish, 316 stainless steel frame with 6 windows and underground box lining), stainless steel comes with a lifetime warranty, looks impressive, with 6 windows so you can see your fish all around. garden, quickly assembled and can be transported at any time. Our clients love them!
Diy How To Build A Modern Pond
Outside pool filtration systems can have pipes accessed through the bottom or side if necessary. Filtration will depend on the number of fish and feeding level.
• Foundation: Welded box pool liner can also be sunk into the ground – simply order the box liner to the required depth. 20 year warranty.
• If your fish have become too large, you can change the size of the pond by improving it by adding different compartments and liners.
Picture above. Instant Pond®-M1 | 2.4 x 2.4 m | Side Trim: Cardinal Gray Slate. Best Finish: Millboard Enriched Grain (smoky)
Garden Pond Overflow.?
An instant pool can be built in a few hours (best assembly time is around 30 minutes) as all installable parts are pre-assembled to save you time.
There is very little site preparation, even for a 4’6″ deep pond, just digging to the required depth.
There are several different instant pool designs. If you have a different design in mind, please email us the drawing and we will let you know if we can make it for you.
• 20ft side wall: 6060mm L x 760mm H – 2 glass viewing windows: 2300mm W x 540mm H
Circular Sandstone Patio
• 10ft side wall: 3030mm L x 760mm H. Viewing area behind glass: 2300mm W x 540mm H.
Rice. above: Instantpond®-M1 | (6 x 3m) 20 x 10ft during fabrication before the 21.5mm thick glass is sealed on site.
Figure: Instantpond®-M1 | (6 x 2.1 m) 20 x 7 ft, located on site and ready for fiberglass installation. Covered with brown cheddar brick overlays.
• At ground level or underground. An instant pool only requires a solid foundation (such as a concrete foundation) and a ring beam depending on the depth.
Raised Garden Pond Ideas
Box sleeves are available in any depth upon request. For swimming pools where a cover is not required, for example. fiberglass base, contact for more information.
Available in five different colors, the enhanced textured Millboard collection adds style and elegance to any project with a smoother wood grain finish. Whether it’s a modern indoor or outdoor look, an outdoor room or a classic deck, our Better Grain will add elegance and style to any project.
• Eco-friendly • Maintenance free • All the best grain slabs: 176mm W x 32mm H • 25 year warranty
: 100% natural. Granite slabs are cut from quarries, cut to size and honed smooth.
How To Build The Perfect Concrete Block Built Koi Pond
: 97% natural. Natural quartz aggregates consist of 93% clear quartz mixed with the remaining 7% colored pigments and polymer resins. Resins bind the particles together.
The superior durability and low maintenance of natural clay. Sustainably and environmentally friendly production in accordance with BS 14001. Sliding bricks match standard equivalent bricks in colour, size and texture. There is a wide choice which makes it easy to adapt existing buildings.
• Each brick slab: 215mm L x 65mm W x 20mm H • Pre-mounted on frames and supports ready for immediate erection • Please note that other slab sizes may not fit the pool size. • 30-year warranty.
Standard 10′ x 10′ ponds can be filtered from the inside using the Oase All-in-One Pump, Filter and UV Filter (2 Oase Filtral 9000 UVC Pond Filters).
Raised Wooden Pond With A Waterfall
In larger ponds, multiple Filtral 9000 units can be used, offering multiple suction, circulation and UV treatment points (i.e. 2 Filtral 9000 units will be suitable for a 18,000 liter pond without fish or for ponds with fish up to 9,000 liters).
Outside pool filtration systems can have pipes accessed through the bottom or side if necessary. Filtration will depend on the number of fish and feeding level. Contact us with your requirements.
1. The pipe is welded according to customer requirements. 2. Openings installed inside the pool for use with the Oase Tradux system. Please contact us indicating the desired location and the required number of outlets/niches.
The pictures above show the Instantpond®-M2 | (2.4 x 2.4 m) 8 x 8 ft during construction. The pool was custom made with three 65mm diameter holes for the filtration system to keep the pool tidy.
Koi Forum Uk
Accept card payments via PayPal using our order form. For custom orders, please send an email with your desired design.
• Otherwise we accept payment by bank transfer. For this option please contact us on +44(0)1255 814101 or contact@.
In the following tabs you will find: Designs / Custom Order Instructions / Postage / Order Form and Pricing / Additional Information.
Complete instructions are sent to each pool. Read all instructions carefully before starting work. If you have any questions please contact us on 01255814101. (Video of assembly in progress).
Koi Pond Glass Window Showcase: Our Case Study (updated)
If the proposed site has hard soil, you will need to level the area for the frame and cladding. If you have unstable, crumbly soil, you may need to build a stronger foundation. If you are going to place the pool on bricks or slabs so that you can mow the grass around the pool, you will need to level them so that the frame has a level surface to stand on. If your box lining is located deeper underground, make sure that when laying bricks/slabs they do not fall inside the frame, as this will lead to the formation of an uneven surface of the box lining walls. Alternatively, you can cut a small trench so that the inside edge matches the inside of the frame. it should be about 4 inches deep and about 10 inches wide to go around the perimeter of the pool and fill it with an 8-1 level sand and cement mixture.
• You are now ready to install the first part of the pool wall. It will need to be leveled until you attach the next section to it. The second part should be placed opposite the first so that the corners touch the walls of the pool at an angle of 90 degrees to each other. Rice. 1.
• Frames have two 10mm diameter mounting holes at each end Fig. 2. Use the supplied tapered rods in the 10mm diameter holes to align the frames, see Fig. 2 so that the clamping bolts can be installed. The six bolts and washers for each corner joint are shouldered at the correct length so that when the nuts and bolts are fully tightened, the neoprene seal is compressed between the corner joint. Bolts with washers and shoulders should be inserted into the holes through both frames so that the washer under the bolt heads fits snugly on one frame and the shoulder on the bolt is visible through the hole in the other frame, see 3. Slide the washer and nut onto the threads . The nuts and bolts should only be tightened at this stage so that they can be adjusted if necessary when you check the diagonals later to ensure your pit is square and the seals are level with the flanges.
• The diagonal size of the pool (without top finishing elements) is 5376 mm. Once you have the correct dimensions, you can repeat the process for the next side. Make sure sides 1 and 3 are parallel, if not then only side 3 is installed. Now move side 1 and 2. Side 4 can be installed and saved by inserting the locking pins into the two holes of corner joint three, screw 6. Lightly tighten the bolts , nuts and washers. Make sure both diagonals are the same. If any adjustment is required, loosen the longer diagonal until they are equal. You can now tighten all the bolts in turn, one at a time, checking along the diagonal until the nut and bolts are tight; The washers will tighten onto the bolt bushings so there is no need to retighten (19 Nm (37 ft-lb)).
Diy: Build A Pond For Wildlife
• It is easier to install the underlay and trim in place before sealing the corner joints. Place the stand in place, it should fit snugly against the bottom corner of the side frames, remove excess with scissors.
• For pools with a flush liner, install the liner with